Salta al contenuto principale

Asus Zenbook UX303L Cooling Fan Replacement

Cosa ti serve

  1. Asus Zenbook UX303L Cooling Fan Replacement, Cooling Fan: passo 1, immagine 1 di 1
    • Make sure the device is turned off and disconnected from the battery charger.

  2. Asus Zenbook UX303L Cooling Fan Replacement: passo 2, immagine 1 di 3 Asus Zenbook UX303L Cooling Fan Replacement: passo 2, immagine 2 di 3 Asus Zenbook UX303L Cooling Fan Replacement: passo 2, immagine 3 di 3
    • Remove the rubber pads closer to the air vents and remove the two screws using a P0 screwdriver.

    • Remove all the nine screws from the bottom of the device using a T5 screwdriver.

    • Carefully remove the bottom cover.

  3. Asus Zenbook UX303L Cooling Fan Replacement: passo 3, immagine 1 di 2 Asus Zenbook UX303L Cooling Fan Replacement: passo 3, immagine 2 di 2
    • Pull on the black flap to lift the LVDS cable next to the cooling fan.

  4. Asus Zenbook UX303L Cooling Fan Replacement: passo 4, immagine 1 di 3 Asus Zenbook UX303L Cooling Fan Replacement: passo 4, immagine 2 di 3 Asus Zenbook UX303L Cooling Fan Replacement: passo 4, immagine 3 di 3
    • Remove the three screws from the hinges using a PH-1 screwdriver.

    • Open the device at a 90 degree angle to free the hinges.

  5. Asus Zenbook UX303L Cooling Fan Replacement: passo 5, immagine 1 di 3 Asus Zenbook UX303L Cooling Fan Replacement: passo 5, immagine 2 di 3 Asus Zenbook UX303L Cooling Fan Replacement: passo 5, immagine 3 di 3
    • Remove the screws attached to the cooling fan with a PH-1 screwdriver.

    • Disconnect the wire attaching the cooling fan to the motherboard.

  6. Asus Zenbook UX303L Cooling Fan Replacement: passo 6, immagine 1 di 2 Asus Zenbook UX303L Cooling Fan Replacement: passo 6, immagine 2 di 2
    • Gently lift and slide the cooling fan out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

3 Commenti

After the 6 step Would i then just remove the dust on the cooling fan and reassemble after that? or replace the fan as a whole

Sean Gerald Wong - Replica

I wish you guys had included the part number for the cooling fan.

mhyson - Replica

I think that it is important to recommend to remove the battery first, otherwise there is a risk of short...

Don't ask me how I know... :-(

Nmariotti - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 16

Tutti i Tempi: 6,084