Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the screen closed, place your laptop upside-down with the front facing you.
-
Remove the six 14.6mm Phillips #00 screws.
-
Remove the four 6.6mm Phillips #00 screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the laptop over and open the lid.
-
Pry around the edges of the laptop base using the plastic opening tool.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully lift the keyboard up.
-
Disconnect the two ZIF connectors from the motherboard using your fingernail to lift the cream-colored tab.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the single 4.7mm PH00 screw holding the wireless card to the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using your fingers, lightly lift up on the black and white antenna cords.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With your fingers lightly pull the wireless card out of the slot.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.