Salta al contenuto principale

Introduzione

This device will show you how to replace a faulty ethernet port with a new working one.

Ricambi

Nessuna parte specificata.

  1. Remove the 9 1.2mm phillips head screws on the bottom of the computer using a small Phillips head screw driver.
    • Remove the 9 1.2mm phillips head screws on the bottom of the computer using a small Phillips head screw driver.

  2. Use a plastic opening tool to open the components of the laptop. In order to do this, insert the plastic opening tool in between the two covers then pry open with your fingers
    • Use a plastic opening tool to open the components of the laptop. In order to do this, insert the plastic opening tool in between the two covers then pry open with your fingers

  3. Remove the 4 1.2mm phillips head screws with a small phillips head screw driver that held the Ethernet port in place. Lift and remove the Ethernet port
    • Remove the 4 1.2mm phillips head screws with a small phillips head screw driver that held the Ethernet port in place.

    • Lift and remove the Ethernet port

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 167