Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert the flat edge of the opening tool in between the back casing to remove the back casing.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a JIS #0 Screwdriver to remove the one 3.0 mm screw.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the black and white wires that provide power and data transfer to the Wi-Fi chip.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.