Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert the flat edge of the opening tool in between the back casing to remove the back casing.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the JIS #0 Screwdriver, remove the five 3.0 mm screws that hold down the hard drive casing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the hard drive up and remove the power supply cable connected to it.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully peel back and remove the plastic hard drive cover to reveal the two 3.0 mm screws on the hard drive casing.
-
Using a JIS #0 screwdriver, unscrew the two 3.0 mm screws on the side of the metal casing to remove the hard drive itself.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.