Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry open the back casing using the opening tool along the side crevice.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the following screws that mount the fan and heatsink to the motherboard:
-
Three 3.0 mm screws for the fan
-
Four 2.0 mm screws for the heatsink
-