Introduzione

The fan maintains the processor in its operating temperature. Dust buildup is common so it is essential to clean the fan occasionally. In extreme cases, the entire fan and heat sink assembly can be replaced.

Parti

Nessuna parte richiesta.

Before doing a repair or replacement make sure the laptop is fully shut off.
  • Before doing a repair or replacement make sure the laptop is fully shut off.

  • Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place.

Aggiungi Commento

Pry open the back casing using the opening tool along the side crevice.
  • Pry open the back casing using the opening tool along the side crevice.

  • Try to use the opening tool at multiple points. Lifting the back casing abruptly could damage the laptop.

Aggiungi Commento

  • Remove the following screws that mount the fan and heatsink to the motherboard:

  • Three 3.0 mm screws for the fan

  • Four 2.0 mm screws for the heatsink

  • The bottom of the heatsink will contain thermal paste. Avoid making contact with this as any dirt or oils can reduce the effectiveness of the cooler.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Carl Zuehlsdorf

Membro da: 13/02/2018

104 Reputazione

1 Guida realizzata

Team

USF Tampa, Team S5-G5, Eyestone Spring 2018 Membro di USF Tampa, Team S5-G5, Eyestone Spring 2018

USFT-EYESTONE-S18S5G5

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 41