Parti

Nessuna parte richiesta.

  1. Flip the computer over so that it is upside down.
    • Flip the computer over so that it is upside down.

    • Slide both latches away from each other (towards the outside).

    • Push the battery out with your fingers.

    • The actual battery is not shown in the photograph.

    Aggiungi Commento

  2. Remove the two screws on the underside of the case.
    • Remove the two screws on the underside of the case.

    • These screws should should have a keyboard "K" symbol next to them.

    Aggiungi Commento

    • Locate the little tabs above the INSERT, F10 and F1 keys, and between the F5 and F6 keys.

    • Starting with the tab above the F1 key, press the tabs inward using your fingernail or spudger. Continue this process for the rest of the tabs.

    • Once all four tabs have been released, the top half of the keyboard should be free.

    Aggiungi Commento

    • Pull the keyboard out at a 45 degree angle and place it upside down on the scroll pad.

    • Pull the wide ribbon cable laterally from its socket on the motherboard.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Steven

Membro da: 24/06/2010

32 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 2-9, Johann Summer 2010 Membro di Cal Poly, Team 2-9, Johann Summer 2010

CPSU-JOHANN-R10S2G9

5 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 4,721