Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the computer upside down.
-
Using your thumbs, slide both latches away from each other (towards the outside).
-
Push the battery out with your fingers.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the Phillips #0 to remove the six screws on the back of the device.
-
Gently open the cover using the tab located by the highlighted box.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unplug the wires by pulling straight up on the white connector and away from the computer.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 to remove the three screws holding the fan in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a cotton swab or compressed air to blow air from the inside, out to clear dust from the vent or heat sink.
-