Salta al contenuto principale

Introduzione

This guide will show how to replace the Hard Drive. It can be completed in a couple of minutes. Hard Drives can fail over time and it is a good idea to replace them before all data is lost, especially on an older device.

Ricambi

Nessuna parte specificata.

  1. Flip the computer over, and unscrew the two 5 mm screws using the Phillips #0 screwdriver. Lift the panel from the device. Lift the panel from the device.
    • Flip the computer over, and unscrew the two 5 mm screws using the Phillips #0 screwdriver.

    • Lift the panel from the device.

  2. Slide the hard drive away from the SATA connector and remove the hard drive from the device. Slide the hard drive away from the SATA connector and remove the hard drive from the device.
    • Slide the hard drive away from the SATA connector and remove the hard drive from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 90