Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.
-
Remove the tablet by lifting up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert the opening tool into the seam of the tablet casing and gently pry upwards.
-
With a little force, you will feel the clips release.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the tool along all four edges of the tablet, making sure that all the clips are released.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The camera board is located in the red square in this image.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws on the camera board using a Phillips #1 Screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift up the power button cable retention clip on the motherboard and pull the cable out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
On the camera connection apparatus, locate the silver tape that connects to the tablet.
-
Peel the silver tape off of the tablet on both sides of the connection apparatus.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently pull the Orange ribbon cable out of the connection port.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.
Un commento
Hello, can you please tell a manufacturer of the camera (is it writter somethere on it)?