Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.
-
Remove the tablet by lifting up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert the opening tool into the seam of the tablet casing and gently pry upwards.
-
With a little force, you will feel the clips release.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the tool along all four edges of the tablet, making sure that all the clips are released.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unclip the white connection clip using a pair of tweezers.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the connection apparatus from the connection clip on the board using a pair of tweezers.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently fold the connection apparatus back away from your work area.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the screws using a Phillips Head #1 screwdriver.
-
Remove the power button module.
-
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.
Un commento
My problem is that when reinstalltng the back cover the button does not fit the button module to press the on/off switch. The switch works allright.
What can i do? At this moment I can only switch the tablet on after removing the back cover.