Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove back cover (pry open along the grey/black line, they are held together by clips)
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift up tab and pull out the connector
-
Unscrew the 4 screws
-
Open up the screen (as you would to open up the laptop), and in doing so the metal piece will open up.
-
Jostle the ports and remove the small board.
-
Annulla: non ho completato questa guida.
Altre 5 persone hanno completato questa guida.
2 Commenti
I have a [newish] 14” Asus 3 [Blue Al./gold trim]. One of my grandchildren has wrecked one of the usb 3.1 sockets on the right [Output] side.
Is it possible to renew this socket? I have all the tools + mini soldering iron. I could connect the remaining one to a usb hub I suppose but it’s an expensive machine and I would rather it be repaired.
Any help/advice very much appreciated. Regards - Denis