Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the device over to its back cover.
-
Use the switches to release the battery from its adapter.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 screwdriver to remove the two 1.5 mm screws in the smaller portion of the bottom cover.
-
After removing the screws, remove the smaller cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 screwdriver to remove the 1.5 mm screws that hold down the hard drive.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the hard drive from the slot.
-
Remove the hard drive from its shell.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the the Philips #0 Screwdriver remove highlighted screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift plastic cover with tweezers.
-
Remove screw.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift keyboard panel with plastic pry tool to remove.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unhook all ribbons to remove keyboard panel completely.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
Un commento
LOL if you want to get out drive, open dvd drive, turn laptop off, remove screw cover, unscrew, pull the drive out, done :D This is stupidly overcomplicated and unnecessary.