Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Asus Eee PC 1215N Keyboard Replacement

Cosa ti serve

  1. Asus Eee PC 1215N Keyboard Replacement, Battery: passo 1, immagine 1 di 2 Asus Eee PC 1215N Keyboard Replacement, Battery: passo 1, immagine 2 di 2
    • Turn the power off and turn the netbook upside down.

    • Slide both battery catches together to release the battery.

    • Slide the battery out.

  2. Asus Eee PC 1215N Keyboard Replacement, Removing Asus Eee PC 1215N Battery Compartment Screws: passo 2, immagine 1 di 1
    • Remove screws on the battery compartment.

  3. Asus Eee PC 1215N Keyboard Replacement, RAM: passo 3, immagine 1 di 3 Asus Eee PC 1215N Keyboard Replacement, RAM: passo 3, immagine 2 di 3 Asus Eee PC 1215N Keyboard Replacement, RAM: passo 3, immagine 3 di 3
    • Locate the memory compartment.

    • Using a Plastic Opening Tools, remove the screw rubber cover.

    • Remove the screw.

  4. Asus Eee PC 1215N Keyboard Replacement: passo 4, immagine 1 di 1
    • Use a Plastic Opening Tools near the screw hole to release the cover.

    • Remove the cover

  5. Asus Eee PC 1215N Keyboard Replacement: passo 5, immagine 1 di 2 Asus Eee PC 1215N Keyboard Replacement: passo 5, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Spudger
    $3.99
    Compra
    • Using a Spudger, push both right and left metal clip to release one of the RAM module.

    • Slide out the RAM module.

    • Do the same with the second RAM module if necessary.

  6. Asus Eee PC 1215N Keyboard Replacement, Top Cover (Touchpad): passo 6, immagine 1 di 1
    • Remove the screws as necessary.

    • For top cover removing, only remove the 2 bottom screws.

    • For Keyboard removing, remove all 4 screws.

    • The one short screw paterns to uper left screw hole directly on the PCB.

  7. Asus Eee PC 1215N Keyboard Replacement: passo 7, immagine 1 di 3 Asus Eee PC 1215N Keyboard Replacement: passo 7, immagine 2 di 3 Asus Eee PC 1215N Keyboard Replacement: passo 7, immagine 3 di 3
    • Use a Plastic Opening Tools to release the top cover.

    • Start from the left side.

    • Go around on the bottom

    • Finish with the right side.

    • The top cover is still connected to the PCB with the touchpad ribbon. Handle it carefully.

  8. Asus Eee PC 1215N Keyboard Replacement: passo 8, immagine 1 di 2 Asus Eee PC 1215N Keyboard Replacement: passo 8, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Spudger
    $3.99
    Compra
    • Carefully slide the top cover to the bottom in order to see the touchpad connector on the PCB.

    • Use a Spudger to slide the conector attachment black part and release the ribbon from the PCB.

    • Now you can remove the top cover

  9. Asus Eee PC 1215N Keyboard Replacement, Keyboard: passo 9, immagine 1 di 3 Asus Eee PC 1215N Keyboard Replacement, Keyboard: passo 9, immagine 2 di 3 Asus Eee PC 1215N Keyboard Replacement, Keyboard: passo 9, immagine 3 di 3
    • Make sure that the two upper screws inside the RAM compartment are removed before to continue. (Refer to Step 5).

    • Remove the keyboard 4 screws on the bottom.

    • Use a Plastic Opening Tools to release the keyboard clips on the left and right side.

  10. Asus Eee PC 1215N Keyboard Replacement: passo 10, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Spudger
    $3.99
    Compra
    • At this step, the keyboard is still maintained with double-sided tape between the keyboard underside and the metallic PCB protector.

    • Carefully slide a Spudger between the keyboard underside and the metallic PCB protector near the center/right at the bottom. Use the spudger as a lever to release the keyboard from the metallic PCB protector.

    • The keyboard is still connected to the PCB with a ribbon. Handle it carefully.

  11. Asus Eee PC 1215N Keyboard Replacement: passo 11, immagine 1 di 2 Asus Eee PC 1215N Keyboard Replacement: passo 11, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Spudger
    $3.99
    Compra
    • Carefully slide the keyboard to the top in order to see the ribbon connector on the PCB.

    • Use a Spudger to slide the connector attachment black part and release the ribbon from the PCB.

    • Now you can remove the keyboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Gaetan

Membro da: 12/26/12

9.574 Reputazione

18 Guide realizzate

Un commento

Yes, you are right! I will have this added shortly.

Thank you.

Gaetan - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 4,476