Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Push open both tabs on either side of the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the tab on the right open, while you remove battery with your other hand.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open the netbook to find the four small grooves along the top of the keyboard.
-
Pry the keyboard up using the plastic opening tool.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Tilt the keyboard away from you to access the connector. Gently push the lock toward the screen to unlock it and slide the ribbon out.
-
Remove the keyboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the netbook over and remove the eight 6.5mm screws using the J0 Phillips head screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the netbook back over and remove the ten 4.5mm screws using the J0 Phillips head screwdriver.
-
Remove the cover plate by sliding the plastic opening tool around the entire edge of the plate.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip up the retaining flap on the ZIF connector. Then, pull the blue tab for the touchpad connector before removing the cover plate completely.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 4.6mm screws with the J0 Phillips head screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the hard drive to the right and then lift it straight out of the netbook.
-
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.