Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.
-
Remove the three 6.0mm Phillips #0 screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open the laptop.
-
Using an iFixit opening tool, pry along the edges of the keyboard.
-
Lift the keyboard and slide it gently towards you.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the six 5.6mm Phillips #0 screws around the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using your thumb and index finger, pinch the multi-color cable and disconnect it from the motherboard.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.