Introduzione

Are your keys not clicking? Did you spill any liquids on your keyboard recently? This guide will help you resolve these situations.

Use a metal spudger to pry off the two feet closest to the hinge of the laptop.
  • Use a metal spudger to pry off the two feet closest to the hinge of the laptop.

  • The feet are attached to the laptop by adhesives, therefore they may not stick as well after multiple removals.

Aggiungi Commento

Use a Phillips #0 screwdriver to unscrew the six 5mm screws.
  • Use a Phillips #0 screwdriver to unscrew the six 5mm screws.

  • Use a Phillips #0 screwdriver to unscrew the two 6mm screws.

Aggiungi Commento

  • Use a plastic opening tool to pry the keyboard off the edges of the computer.

  • The edges will make a popping noise.

Aggiungi Commento

  • Flip up the white bar that connects the thin white strip using a plastic opening tool.

  • Grab the thin white strip and pull straight back to remove the strip from the connector.

Aggiungi Commento

  • Use a plastic opening tool to lift the black bar above the wide black strip in the connector.

  • Grab the wide black strip and pull straight back to remove the strip from the connector.

  • Remove the keyboard by lifting it straight up.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Brittany M Won

Membro da: 18/04/2018

577 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S17-G4, Livingston Spring 2018 Membro di Cal Poly, Team S17-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G4

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 71