Salta al contenuto principale

Asus 1015E-DS03 Keyboard Replacement

Cosa ti serve

  1. Asus 1015E-DS03 Keyboard Replacement, Battery: passo 1, immagine 1 di 1
    • Hold the laptop using both hands with the battery facing upwards.

  2. Asus 1015E-DS03 Keyboard Replacement: passo 2, immagine 1 di 1
    • Push the two tabs located below the battery in towards each other using your thumbs.

  3. Asus 1015E-DS03 Keyboard Replacement: passo 3, immagine 1 di 1
    • Push the battery upwards and out of the laptop as shown.

  4. Asus 1015E-DS03 Keyboard Replacement: passo 4, immagine 1 di 1
    • Continue to push the battery upwards until it is completely separated from the laptop as shown.

  5. Asus 1015E-DS03 Keyboard Replacement, Keyboard: passo 5, immagine 1 di 1
    • Once the battery is removed, unscrew the highlighted 3mm screws (4) using a #0 Phillps head screwdriver.

    • Be very careful not to lose the screws, these four screws are very small.

  6. Asus 1015E-DS03 Keyboard Replacement: passo 6, immagine 1 di 2 Asus 1015E-DS03 Keyboard Replacement: passo 6, immagine 2 di 2
    • After all four screws are removed, flip the laptop over with the keyboard facing up.

    • Use a spudger to pry up where the keyboard is attached to the laptop on all sides until it is detached from the laptop.

    • It is normal to hear cracking noises when prying off the keyboard.

    • After keyboard is detached from laptop, there is a ribbon cable still attached to the motherboard. See next step before completely removing keyboard.

  7. Asus 1015E-DS03 Keyboard Replacement: passo 7, immagine 1 di 1
    • After the keyboard is detached, the ribbon cable which connects the keyboard to the laptop's motherboard is exposed.

    • Be careful not to tear or rip the ribbon cable.

  8. Asus 1015E-DS03 Keyboard Replacement: passo 8, immagine 1 di 1
    • Using the spudger push the white clips upwards that are holding the cable.

  9. Asus 1015E-DS03 Keyboard Replacement: passo 9, immagine 1 di 2 Asus 1015E-DS03 Keyboard Replacement: passo 9, immagine 2 di 2
    • Gently pull the strip out of the square slot.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

Clemson, Team 7-4, Benson Spring 2016 Membro di Clemson, Team 7-4, Benson Spring 2016

CLEM-BENSON-S16S7G4

5 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 965