Salta al contenuto principale

Assembling the case

Cosa ti serve

    • Reinstall the left side panel.

    • Put on the side wall and make sure that the lugs are snapped into the slots provided. Then slide the side panel slightly forward. The side panel should audibly snap into place when pushed forward.

    • Reinstall the right side panel.

    • First attach the side wall and make sure that the lugs have snapped into the slots provided. Then slide the side panel slightly forward. The side panel should audibly snap into place when pushed forward.

  1. Assembling the case: passo 3, immagine 1 di 1
    • Place the housing cover back on the coffee maker.

  2. Assembling the case: passo 4, immagine 1 di 2 Assembling the case: passo 4, immagine 2 di 2
    • Use the Torx T15 screwdriver to tighten the 2 countersunk screws on the housing cover.

  3. Assembling the case: passo 5, immagine 1 di 2 Assembling the case: passo 5, immagine 2 di 2
    • Using the oval head wrench, tighten the 4 oval head screws on the back of the machine.

  4. Assembling the case: passo 6, immagine 1 di 3 Assembling the case: passo 6, immagine 2 di 3 Assembling the case: passo 6, immagine 3 di 3
    • Replace the water tank,

    • the drip tray with drip tray, pulp tray and pulp container,

    • and place the aroma protection cover back on.

Linea Traguardo

Un'altra persona ha completato questa guida.

Un ringraziamento speciale a questi traduttori:

de en

100%

oldturkey03 ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Natalie

Membro da: 05/08/19

738 Reputazione

4 Guide realizzate

Team

KMM 2019SS Membro di KMM 2019SS

Community

11 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 18

Tutti i Tempi: 789