Introduzione
This guide, along with the prerequisite guides, will demonstrate how to remove and replace the camera in your Arnova 7K G3 tablet.
Cosa ti serve
-
-
Peel the copper tape covering the ribbon connector with a set of tweezers.
-
-
-
-
Remove the two Phillips #00 screws from the motherboard.
-
-
-
Locate the camera and camera ribbon connection on the backside of the motherboard.
-
Quasi finito!
To reassemble your device, follow these instructions in reverse order.
Conclusione
To reassemble your device, follow these instructions in reverse order.