Salta al contenuto principale

Archos Jukebox Recorder 20 Motherboard Replacement

Cosa ti serve

  1. Archos Jukebox Recorder 20 Motherboard Replacement, Battery: passo 1, immagine 1 di 1
    • Remove the plastic cover over the batteries on both sides of the device.

  2. Archos Jukebox Recorder 20 Motherboard Replacement: passo 2, immagine 1 di 1
    • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

  3. Archos Jukebox Recorder 20 Motherboard Replacement, Button Panel: passo 3, immagine 1 di 1
    • Using the Philips Screwdriver, remove the top 2 screws.

    • The screws are very small (2.5mm), put them somewhere you won't lose them.

  4. Archos Jukebox Recorder 20 Motherboard Replacement: passo 4, immagine 1 di 1
    • Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).

  5. Archos Jukebox Recorder 20 Motherboard Replacement: passo 5, immagine 1 di 2 Archos Jukebox Recorder 20 Motherboard Replacement: passo 5, immagine 2 di 2
    • Remove the face.

  6. Archos Jukebox Recorder 20 Motherboard Replacement, Motherboard: passo 6, immagine 1 di 1
    • Remove four surrounding T5 screws as shown

  7. Archos Jukebox Recorder 20 Motherboard Replacement: passo 7, immagine 1 di 1
    • Remove all four purple bumpers. You may have to bend the metal surround out of the way.

  8. Archos Jukebox Recorder 20 Motherboard Replacement: passo 8, immagine 1 di 1
    • Remove metal surround from the Jukebox. You may have to straighten out tabs that were bent during disassembly.

  9. Archos Jukebox Recorder 20 Motherboard Replacement: passo 9, immagine 1 di 2 Archos Jukebox Recorder 20 Motherboard Replacement: passo 9, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Desoldering Pump
    $3.99
    Compra
    • Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump.

  10. Archos Jukebox Recorder 20 Motherboard Replacement: passo 10, immagine 1 di 2 Archos Jukebox Recorder 20 Motherboard Replacement: passo 10, immagine 2 di 2
    • Desolder the remaining two points on the backside of the Jukebox.

    • The Motherboard should now be free from the frame and ready for repair or replacement.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Shaun Rifield

Membro da: 03/21/18

121 Reputazione

1 Guida realizzata

Team

IUPUI, Team S2-G3, Freund Spring 2018 Membro di IUPUI, Team S2-G3, Freund Spring 2018

IUPUI-FREUND-S18S2G3

3 Membri

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 386