Introduzione

This guide will show you how to replace the motherboard

  1. Remove the plastic cover over the batteries on both sides of the device.
    • Remove the plastic cover over the batteries on both sides of the device.

  2. Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).
    • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

    • Using the Philips Screwdriver, remove the top 2 screws.

    • The screws are very small (2.5mm), put them somewhere you won't lose them.

    • Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).

    • Remove the face.

    • Remove four surrounding T5 screws as shown

    • Remove all four purple bumpers. You may have to bend the metal surround out of the way.

    • Remove metal surround from the Jukebox. You may have to straighten out tabs that were bent during disassembly.

    • Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump.

    • Desolder the remaining two points on the backside of the Jukebox.

    • The Motherboard should now be free from the frame and ready for repair or replacement.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Shaun Rifield

Membro da: 21/03/2018

121 Reputazione

1 Guida realizzata

Team

IUPUI, Team S2-G3, Freund Spring 2018 Membro di IUPUI, Team S2-G3, Freund Spring 2018

IUPUI-FREUND-S18S2G3

3 Membri

2 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 43