Aggiusta la tua roba Comunità Store

Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement

Introduzione

Use this guide to replace the 20-inch sediment pre-filter for your Aquasana F-300R 300,000-gallon whole house water filtration system.

The sediment pre-filter keeps rust, dirt, and sediment particles from entering the main filter unit.

After 2-3 months of use (when the pre-filter darkens or water flow slows), the sediment pre-filter must be replaced. When this pre-filter is not replaced in a timely manner, water pressure can drop, and sediment particles can enter and clog the main filter tank.

Cosa ti serve

  1. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement, 20-inch Sediment Pre-Filter: passo 1, immagine 1 di 2 Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement, 20-inch Sediment Pre-Filter: passo 1, immagine 2 di 2

    • Turn off the water supply by turning the water valve(s) to be horizontal, or perpendicular to the water pipe.

    • You may have one or two valves depending on the installation of your system.

    Modifica

  2. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 2, immagine 1 di 1

    • Press the black pressure release button on top of the filter housing.

    • Hold the button down for 5 seconds.

    Modifica

  3. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 3, immagine 1 di 3 Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 3, immagine 2 di 3 Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 3, immagine 3 di 3

    • Unscrew the filter housing canister clockwise with a water filter housing wrench.

    Modifica

  4. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 4, immagine 1 di 1

    • Remove the dirty pre-filter and dispose of it.

    Modifica

  5. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 5, immagine 1 di 3 Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 5, immagine 2 di 3 Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 5, immagine 3 di 3

    • Wash the filter housing canister with dish soap and water.

    • You may need a long-handled cleaning brush to scrub off dirt and debris.

    • Rinse and dry the filter housing canister.

    Modifica

  7. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 6, immagine 1 di 1

    • Remove the O-ring from the housing canister.

    Modifica

  8. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 7, immagine 1 di 1

    • Clean off old grease on the O-ring with a towel.

    Modifica

  9. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 8, immagine 1 di 2 Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 8, immagine 2 di 2

    • Replace the O-ring.

    • Apply Vaseline or lube around the seal.

    Modifica

  10. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 9, immagine 1 di 2 Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 9, immagine 2 di 2

    • Place the new pre-filter in the center of the filter housing canister.

    Modifica

  11. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 10, immagine 1 di 2 Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 10, immagine 2 di 2

    • Screw the filter housing canister counter-clockwise with your hands.

    Modifica

  12. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 11, immagine 1 di 1

    • Tighten the filter housing canister with the filter wrench.

    Modifica

  13. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 12, immagine 1 di 2 Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 12, immagine 2 di 2

    • Turn on the water supply by turning the water valve(s) to be vertical, or parallel to the water pipe.

    Modifica

  14. Aquasana F-300R 300,000 Gallon Whole House Water Filtration System 20-Inch Sediment Pre-Filter Replacement: passo 13, immagine 1 di 1

    • Run water in a sink or tub for 1-2 minutes to flush out the system and remove any air in the pipes.

    Modifica
Conclusione

Repeat steps every 2-3 months for best results.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 9

Tutti i Tempi: 220