Salta al contenuto principale

Apple TV 3rd Generation Logic Board Replacement

Cosa ti serve

  1. Apple TV 3rd Generation Logic Board Replacement, Snap-on Base: passo 1, immagine 1 di 1
    • As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.

  2. Apple TV 3rd Generation Logic Board Replacement: passo 2, immagine 1 di 1
    • Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.

  3. Apple TV 3rd Generation Logic Board Replacement, Logic Board: passo 3, immagine 1 di 1
    • Use a philips screwdriver to remove the 5 screws securing the metal heat sink. On Rev A (A1469) you need a T7 srewdriver

  4. Apple TV 3rd Generation Logic Board Replacement: passo 4, immagine 1 di 2 Apple TV 3rd Generation Logic Board Replacement: passo 4, immagine 2 di 2
    • Disconnect the power supply connector from the logic board with a spudger.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 10 persone hanno completato questa guida.

Vincent Monteil

Membro da: 07/06/13

6.975 Reputazione

19 Guide realizzate

4 Commenti

Where can I find a 3rd Generation Apple TV Logic Board?

Ricky Vaughn - Replica

Good question! Did you manage to find a replacement?

Nathan Bugeja -

Hi my wifi and athernet is not working in apple tv on screen it showing your apple tv is connected to local network its not connect to internet now how should i repair this

Mohamed Iqbal Sayyed - Replica

Mine too, where could I find a logic board replacement???

Juan Ignacio Gutierrez I. -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 30

Tutti i Tempi: 9,677