Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Apple PowerBook G3 400 Keyboard Replacement

Introduzione

This guide will show you how to replace the keyboard in a simple step by step process.

  1. Apple PowerBook G3 400 Keyboard Replacement, Keyboard: passo 1, immagine 1 di 1

    • Pull the keyboard tabs toward you while lifting up on the keyboard until it releases from it's hold.

    • To lift the keyboard out pull it up and away from you. Then place the keyboard on the track pad.

    Traduci

  3. Apple PowerBook G3 400 Keyboard Replacement: passo 2, immagine 1 di 1

    • Pull the keyboard ribbon vertically from the logic board to release connection.

    • The connector may be tight and difficult to remove. If stuck try rocking the connector back and forth while pulling up until it releases. This same process can be used for many of the connectors on this device.

    • Remove battery and CD/DVD drives before proceeding any further.

    Traduci

  4. Apple PowerBook G3 400 Keyboard Replacement: passo 3, immagine 1 di 1

    • Your computer should look approximately like this.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Byron Hoefer

Membro da: 04/18/11

70 Reputazione

2 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

Cal Poly, Team 4-2, Regan Spring 2011 Membro di Cal Poly, Team 4-2, Regan Spring 2011

CPSU-REGAN-S11S4G2

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 1,758