Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Before starting, make sure the display is UNPLUGGED. Failure to do so can result in shock and serious injury.
-
Flip the Cinema Display so it is on its face and the feet are pointed away from you.
-
Using the PH 2 screwdriver, unscrew the three feet screws (9.52 x 4.43 mm).
-
Remove the back foot from the hinge mount by gently pulling it upwards.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver.
-
Once the screws are removed, lift the back plate off of the display.
-
Completely remove the back plate and set it aside.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the USB cable routing screw (8 x 2.72mm) using the PH 2 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unplug the USB cable connector from the screen box.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the PH 2 screwdriver, unscrew the two screws (4.85 x 2.94mm) on the USB ports.
-