Aggiusta la tua roba Comunità Store

Apple AirPort Extreme Model A1143 Case Replacement

Introduzione

This will be the starting point for any repairs that you may need to do on your Apple AirPort Extreme Model A1143. Some patience should be used when removing the case as it can be fragile.

Cosa ti serve

  1. Apple AirPort Extreme Model A1143 Case Replacement, Back Pad: passo 1, immagine 1 di 1

    • The back pad is held in with glue so use caution when removing to prevent tearing. Low heat may be used to help remove the pad.

    • Slowly peel off the rubber pad on the bottom of the device. Start from one corner and peel with your fingers. Use heat if necessary until pad is completely removed.

    Modifica

  2. Apple AirPort Extreme Model A1143 Case Replacement, Back Cover: passo 2, immagine 1 di 1

    • After removing the rubber pad, unscrew the five 5mm phillips #00 screws in the holes of the back cover.

    Modifica

  4. Apple AirPort Extreme Model A1143 Case Replacement: passo 3, immagine 1 di 1

    • Lift up the back case from the perforated edge to remove it.

    Modifica

  5. Apple AirPort Extreme Model A1143 Case Replacement, Remove from Case: passo 4, immagine 1 di 1

    • Remove logic board and metal casing from outer case by prying from one side using a spudger.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Zak

Membro da: 09/23/14

616 Reputazione

4 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

USF Tampa, Team 12-4, Blackwell Fall 2014 Membro di USF Tampa, Team 12-4, Blackwell Fall 2014

USFT-BLACKWELL-F14S12G4

5 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 13

Tutti i Tempi: 3,084