Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Apple AirPort Extreme Model A1034 Motherboard Replacement

In evidenza

Scritto Da: Michael Garcia (e 7 altri collaboratori)
  • Commenti: 0
  • Preferiti: 3
  • Completamenti: 1

Guida In Evidenza

Difficoltà

Moderato

Passi

8

Tempo Necessario

10 - 15 minuti

Sezioni

2

Contrassegni

3

Action Shots

Foto Azione

Passa all'azione, eroe! Questa guida ha bisogno di immagini che meglio illustrano come eseguire azioni specifiche.

Featured Guide

Guida In Evidenza

Questa guida è stata giudicata eccezionalmente ben fatta dallo staff iFixit.

Better Introduction

Introduzione Migliore

Migliora questa guida completando o revisionando la sua introduzione.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte specificata.

  1. Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

    • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

    Modifica

  2. Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

    • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

    Modifica

  3. Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing. Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

    • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

    Modifica

  4. Kit per Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kit per Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

  5. Unplug the black connector on the top of the metal casing by gently pulling horizontally.

    • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

    Modifica

  6. Remove the four 4.3mm phillips screws from the bottom of the metal casing.

    • Remove the four 4.3mm phillips screws from the bottom of the metal casing.

    Modifica

  7. Lift and separate the top and bottom of the metal casing. You will now expose the motherboard and the AirPort card.

    • Lift and separate the top and bottom of the metal casing. You will now expose the motherboard and the AirPort card.

    • To remove the AirPort card, gently pull the plastic tab horizontally.

    Modifica

  8. Locate and remove the three 5.0mm phillips screws from the heat sink.

    • Locate and remove the three 5.0mm phillips screws from the heat sink.

    • Lift to remove the heat sink from the motherboard.

    Modifica

  9. Locate and remove the five 7.5mm phillips screws from the motherboard. Lift and separate the motherboard from the bottom metal casing.

    • Locate and remove the five 7.5mm phillips screws from the motherboard.

    • Lift and separate the motherboard from the bottom metal casing.

    • There will be a loose hexagonal female screw extender under the motherboard.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 7 altri collaboratori

Michael Garcia

Membro da: 12/10/2011

369 Reputazione

5 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

Cal Poly, Team 17-15, Regan Fall 2011 Membro di Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 Membri

7 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 17

Tutti i Tempi: 5,373