Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Anker 2.4G Wireless Mouse Scroll Wheel Replacement

Introduzione

This mouse was designed with usability in mind taking little to no effort to fix anything.

Cosa ti serve

  1. Anker 2.4G Wireless Mouse Scroll Wheel Replacement, Scroll Wheel: passo 1, immagine 1 di 1

    • Use the screwdriver to remove the stickers hiding the screws marked in red.

    Traduci

  2. Anker 2.4G Wireless Mouse Scroll Wheel Replacement: passo 2, immagine 1 di 1

    • Remove the 4 screws to continue.

    Traduci

  4. Anker 2.4G Wireless Mouse Scroll Wheel Replacement: passo 3, immagine 1 di 2 Anker 2.4G Wireless Mouse Scroll Wheel Replacement: passo 3, immagine 2 di 2

    • Pry the center of the mouse apart to separate the upper and lower housing of the boards.

    Traduci

  5. Anker 2.4G Wireless Mouse Scroll Wheel Replacement: passo 4, immagine 1 di 1

    • Remove the wires from the white crimp headers. This will separate the upper and lower housing units of the mouse.

    • Don't pull the wires too hard, as they might break.

    Traduci

  6. Anker 2.4G Wireless Mouse Scroll Wheel Replacement: passo 5, immagine 1 di 2 Anker 2.4G Wireless Mouse Scroll Wheel Replacement: passo 5, immagine 2 di 2

    • Pull the Scroll wheel, in red, to the left to remove it.

    • This may take some force to remove. Make sure to pull it parallel to the board, instead of perpendicularly.

    • Replace/clean if needed.

    • If your mouse still doesn't work after this step, please continue onto the next step.

    Traduci

  7. Anker 2.4G Wireless Mouse Scroll Wheel Replacement: passo 6, immagine 1 di 1

    • Desolder these 3 pins and solder the replacement part in.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 12 altri collaboratori

Vincent Lee

Membro da: 01/23/14

361 Reputazione

3 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 1-39, Maness Winter 2014 Membro di Cal Poly, Team 1-39, Maness Winter 2014

CPSU-MANESS-W14S1G39

4 Membri

16 Guide realizzate

Un commento

Hi Vincent, could you please help me with finding a place where this rotation sensor can be bought. I'm not even sure how this part is called so searching for it is quite tricky.

Cheers,

Michal

Michal Rorat - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 36

Tutti i Tempi: 8,448