Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
first remove the 2 screws at the green plastic plate.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
remove the plastic plate ( battery compartment)
-
you'll see that there are 2 more screws. Remove them.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
now gently remove the green plastic plate arrounf the baby monitor ( arround the screen) use a spudger to click it open.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
now open the monitor by clicking it open or slide it open. Sometimes its easier to use a spudger.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
2 battery's were exploded so the acid was on the black electric power wire.
-
use a cotton swab with a little bit of destilled water.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
remove the 2 PCB's by removing the screws shown in the picture.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
pull the first PCB up and remove the screws of the second PCB.
-
after removing the two PCB's, clean the acid on the PCB.
-
after cleaning the PCB's put it al together again.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
first remove the battery lid. 1 screw.
-
slide it out like you see in picture
-
remove battery's
-
Annulla: non ho completato questa guida.
Altre 6 persone hanno completato questa guida.
13 Commenti
Hi. At my Angelcare (AC401) parent unit the screen has slowly become worse and worse. At first, parts of the temperature figures dissapeared, then the symbols around and now I no longer see anything... But the unit still works! (And alert me if the baby's crying) What do you think, is there anything I can do or do I need to buy a new one?
Hi There. I’m having the same problem. Did you find a fix or did you buy a new unit?
Eugene -