Introduzione
Use this guide to replace the hook-and-loop sandpaper disc on a Clarke Floor Sander 07163A 2017.
This guide shows the removal of just one disc, but the procedure for the other two discs is identical.
-
-
Carefully tilt the sander back and lay it down on its side, exposing the three sanding pads on the bottom.
-
-
Quasi finito!
To reassemble your device, follow these instructions in reverse order.
Conclusione
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
