Aggiusta le tue cose Community Store

AmazonBasics B00Q3KFX8U Drive Gear Replacement

Introduzione

This repair would be necessary if the plastic drive gears within the AmazonBasics stripped, meaning the teeth were either ground down or broke off. A telltale sign of this is if you can hear the motor spinning, but the shredding blades do not move.

Cosa ti serve

  1. AmazonBasics B00Q3KFX8U Drive Gear Replacement, Drive Gear: passo 1, immagine 1 di 1

    • Remove the shredder assembly from the paper scrap bin.

    Modifica

  2. AmazonBasics B00Q3KFX8U Drive Gear Replacement: passo 2, immagine 1 di 1

    • Remove the two 10mm PH1 screws holding the small black panel in place.

    Modifica

  3. AmazonBasics B00Q3KFX8U Drive Gear Replacement: passo 3, immagine 1 di 2 AmazonBasics B00Q3KFX8U Drive Gear Replacement: passo 3, immagine 2 di 2

    • Remove the six 14mm PH1 screws holding the bottom cover in place.

    • Remove the cover by lifting straight upwards.

    • One of the screws will be hidden beneath a warranty sticker. Simply push the head of the screwdriver through the sticker to access the screw.

    Modifica

  5. AmazonBasics B00Q3KFX8U Drive Gear Replacement: passo 4, immagine 1 di 1

    • Remove the blade/motor assembly from the top cover by lifting straight upwards. Do not disconnect any wiring just yet.

    • The blades are sharp. Coming into contact with them may result in injury.

    Modifica

  6. AmazonBasics B00Q3KFX8U Drive Gear Replacement: passo 5, immagine 1 di 2 AmazonBasics B00Q3KFX8U Drive Gear Replacement: passo 5, immagine 2 di 2

    • Remove the five 8mm PH2 screws from the bracket holding the gears in place.

    Modifica

  7. AmazonBasics B00Q3KFX8U Drive Gear Replacement: passo 6, immagine 1 di 1

    • Use a metal spudger to pry the bracket from the main shredder assembly.

    • If the bracket is attached too tightly for the spudger, carefully use a metal screwdriver to pry it loose.

    Modifica

  8. AmazonBasics B00Q3KFX8U Drive Gear Replacement: passo 7, immagine 1 di 2 AmazonBasics B00Q3KFX8U Drive Gear Replacement: passo 7, immagine 2 di 2

    • Remove the two plastic drive gears from the shredder assembly by lifting straight upwards.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

William Foley

Membro da: 03/25/16

548 Reputazione

4 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

UMass Dartmouth, Team 1-3, Miles Spring 2016 Membro di UMass Dartmouth, Team 1-3, Miles Spring 2016

UMASSD-MILES-S16S1G3

2 Membri

4 Guide realizzate

3 Commenti

Where does one buy these gear parts?

opticdreams - Replica

Hi, you can buy the gear here: https://www.ebay.com/itm/116169745117

Mr. Master -

I need big wheel for Bonsaii C220-A and need a duel gear wheel (1.6 inches and 0.5 inches) Apelila Apelila paper shredder

Raju Nivarthi - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 19

Tutti i Tempi: 1,532