Salta al contenuto principale
  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Using your hands, gently remove the taped-in rubber foot from device. Using your hands, gently remove the taped-in rubber foot from device.
    • Using your hands, gently remove the taped-in rubber foot from device.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully peel off the bottom pad to expose the fastening screws. Remove three silver 1.4 T5 Torx screws on the top row.
    • Carefully peel off the bottom pad to expose the fastening screws.

    • Remove three silver 1.4 T5 Torx screws on the top row.

    • Remove one green 1mm T5 Torx screw in the middle.

    • Remove a black 1.5mm T5 screw.

    • Remove three green 1mm T5 screws from the bottom row.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    After the screws are removed, grip the front panel and remove, using a plastic opening tool if necessary. This will expose the inside of the device.
    • After the screws are removed, grip the front panel and remove, using a plastic opening tool if necessary. This will expose the inside of the device.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use tweezers or your hands to carefully disconnect the red wires connecting the speakers to the power supply board. Repeat this step for the other speaker, and lay the front section flat with the facing down.
    • Use tweezers or your hands to carefully disconnect the red wires connecting the speakers to the power supply board.

    • Repeat this step for the other speaker, and lay the front section flat with the facing down.

    • Make sure to ground yourself against a metal object nearby (ex. a metal chair, a door frame) before you touch any circuitry. An accidental static discharge can permanently damage a circuitboard.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use a non-magnetic T-6 screwdriver to unscrew the four 6mm screws on the speaker mount. Repeat this step for the other speaker. Repeat this step for the other speaker.
    • Use a non-magnetic T-6 screwdriver to unscrew the four 6mm screws on the speaker mount.

    • Repeat this step for the other speaker.

  6. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Gently lift the speaker needing replacement from the device. Gently lift the speaker needing replacement from the device.
    • Gently lift the speaker needing replacement from the device.

Linea Traguardo

Un'altra persona ha completato questa guida.

2 Commenti

Seems you missed an important step on here. How do you get the front off the box? Show how to remove the speaker grill, the grill cloth and then pry up the digitizer and screen. That’s where all the f***ing screws are!!! That’s how you get into this damned thing!! But you left all that ‘unimportant’ stuff out.

n3tqv - Replica

Where do you get a replacement speakers

bluwolf224 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 70

Tutti i Tempi: 4,721