Salta al contenuto principale

Introduzione

This guide is to show how to replace a damaged or dirty sound foam case on the Echo Show 2nd gen device.

Ricambi

Nessuna parte specificata.

  1. Make sure the device is unplugged and powered off. Turn the two screw plugs counterclockwise with a metal spudger until they are 90 degrees from their original position. Pull each of the plugs out.
    • Make sure the device is unplugged and powered off.

    • Turn the two screw plugs counterclockwise with a metal spudger until they are 90 degrees from their original position.

    • Pull each of the plugs out.

  2. Use the metal spudger to pry and create space between the sound foam and the frame. Once you have sufficiently pried the foam from the frame on each side, detach the sound foam from the frame with your hands. Once you have sufficiently pried the foam from the frame on each side, detach the sound foam from the frame with your hands.
    • Use the metal spudger to pry and create space between the sound foam and the frame.

    • Once you have sufficiently pried the foam from the frame on each side, detach the sound foam from the frame with your hands.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 37

Tutti i Tempi: 611