Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Power off and unplug the echo
-
Using the plastic opening tool, peel off the rubber layer on the bottom of the echo.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the T8 screwdriver bit to unscrew the four 1.6mm torx screws
-
Remove the black cylindrical base
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the metal spudger to lift the ZIF connector
-
Remove the ribbon cable from the slot
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the silver divider
-
Remove black rubber divider
-
Remove the plastic white frame
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the metal spudger to lift the ZIF connector
-
Remove the ribbon cable from the slot on the LED/speaker board
-
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.
Un commento
I can’t seem to find the board anywhere. Where would you buy one?