Aluratek ADMPF310F Screen Replacement

Introduzione

This guide will walk you through how to replace the screen to your digital frame. This is one of the most simplest guides and doesn't take a lot of time at all.

Cosa ti serve

Passo 1 Screen

Aluratek ADMPF310F Screen Replacement, Screen: passo 1, immagine 1 di 3

Aluratek ADMPF310F Screen Replacement, Screen: passo 1, immagine 2 di 3

Aluratek ADMPF310F Screen Replacement, Screen: passo 1, immagine 3 di 3

Using the plastic opening tool, pry off the clips all around the frame. You will hear a popping sound for every clip
Be sure not to pry to hard because you could crack or break the plastic facing of the device.

Traduci

Passo 2

Lift screen out of place so you can access the plugs that connect it.
Be careful not to pull the screen to far away when placing to the side, many fragile wires are connected.

Traduci

Passo 3

Using the plastic spudger tool lift the plastic zif(zero instertion force) connector clip up.
Pull the ribbon cable away from the motherboard.
Be careful as this clip is very frail.