Salta al contenuto principale

Altec Lansing BoomJacket Speaker Replacement

Cosa ti serve

  1. Altec Lansing BoomJacket Speaker Replacement, Speaker: passo 1, immagine 1 di 1
    • Using your hands, remove the pegs (4+4) from the front and back of the speaker.

  2. Altec Lansing BoomJacket Speaker Replacement: passo 2, immagine 1 di 1
    • Remove the outer black rubber housing of the speaker.

  3. Altec Lansing BoomJacket Speaker Replacement: passo 3, immagine 1 di 1
    • Remove the inner blue rubber housing from the speaker.

  4. Altec Lansing BoomJacket Speaker Replacement: passo 4, immagine 1 di 1
    • Pull out the two black wire meshes using a metal spudger.

    • Be careful not to damage the metal casing.

  5. Altec Lansing BoomJacket Speaker Replacement: passo 5, immagine 1 di 2 Altec Lansing BoomJacket Speaker Replacement: passo 5, immagine 2 di 2
    • Using tweezers remove the rubber stoppers (4 at the back + 2 at the front).

  6. Altec Lansing BoomJacket Speaker Replacement: passo 6, immagine 1 di 1
    • Using the size PH1 screwdriver remove the screws (4 around each speaker).

  7. Altec Lansing BoomJacket Speaker Replacement: passo 7, immagine 1 di 1
    • Pull the case apart and you will be able to see all the components inside the speaker.

  8. Altec Lansing BoomJacket Speaker Replacement: passo 8, immagine 1 di 1
    • Remove the speakers (not entirely because of the wiring) by gently pulling each speaker up.

Conclusione

To reassemble your device, follow these instructions in reverse order.

2 Commenti

Where do I find the correct part to replace the charging port on my boom jacket?

Rockstar - Replica

1.1" External Magnetic Type Round Slim Plastic Shell Speaker 8 Ohm 0.25W 2 Pcs

Eeshton -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 741