Introduzione
If the speaker sound quality is distorted or quiet you can follow this guide to replace the defective speaker.
Cosa ti serve
-
-
-
Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.
Chiedi a FixBot
-
-
-
Using your fingers, grab the blue sleeve from one side and pull away from the unit.
-
-
-
At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.
-
-
-
Strumento utilizzato in questo passaggio:Tweezers$4.99
-
Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.
-
-
-
Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.
-
-
-
-
-
Unscrew the two screws on the smaller speaker.
-
Pull the small speaker through the larger speaker hole.
-
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.
Team
UW Tacoma, Team S1-G4, Cardinal Summer 2018 Membro di UW Tacoma, Team S1-G4, Cardinal Summer 2018
UWT-CARDINAL-SU18S1G4
4 Membri
36 guide realizzate
