Salta al contenuto principale

Altec Lansing BoomJacket 2 Motherboard Replacement

Cosa ti serve

  1. Altec Lansing BoomJacket 2 Motherboard Replacement, Altec Lansing BoomJacket 2 Disassembly: passo 1, immagine 1 di 2 Altec Lansing BoomJacket 2 Motherboard Replacement, Altec Lansing BoomJacket 2 Disassembly: passo 1, immagine 2 di 2
    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

  2. Altec Lansing BoomJacket 2 Motherboard Replacement: passo 2, immagine 1 di 2 Altec Lansing BoomJacket 2 Motherboard Replacement: passo 2, immagine 2 di 2
    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

  3. Altec Lansing BoomJacket 2 Motherboard Replacement: passo 3, immagine 1 di 1
    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

  4. Altec Lansing BoomJacket 2 Motherboard Replacement: passo 4, immagine 1 di 2 Altec Lansing BoomJacket 2 Motherboard Replacement: passo 4, immagine 2 di 2
    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

  5. Altec Lansing BoomJacket 2 Motherboard Replacement: passo 5, immagine 1 di 1
    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

  6. Altec Lansing BoomJacket 2 Motherboard Replacement: passo 6, immagine 1 di 1
    • Gently pull apart the front panel from the base of the speaker.

  7. Altec Lansing BoomJacket 2 Motherboard Replacement, Battery: passo 7, immagine 1 di 1
    • The battery will be in the middle of the speaker when the case is open.

  8. Altec Lansing BoomJacket 2 Motherboard Replacement: passo 8, immagine 1 di 1
    • Pull firmly from both sides of the pin to disconnect the battery cable from the motherboard.

    • Pull battery up and away from speaker without catching any other components.

    • Motherboards have fragile components and can easily be damaged if they are hit or pulled on while extracting other parts.

  9. Altec Lansing BoomJacket 2 Motherboard Replacement, Motherboard: passo 9, immagine 1 di 2 Altec Lansing BoomJacket 2 Motherboard Replacement, Motherboard: passo 9, immagine 2 di 2
    • Disconnect the furthest right hand plug first.

    • Do not pull from the wires. Pull from the white connector.

  10. Altec Lansing BoomJacket 2 Motherboard Replacement: passo 10, immagine 1 di 1
    • Gently pull the motherboard directly upwards to avoid damage.

    • Be sure to lift slowly.

  11. Altec Lansing BoomJacket 2 Motherboard Replacement: passo 11, immagine 1 di 1
    • Disconnect the remaining connectors from the motherboard.

    • Do not forcefully pull connectors. Pull from the connectors, not from the wires.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Zach Braaten

Membro da: 07/12/18

516 Reputazione

4 Guide realizzate

Team

UW Tacoma, Team S1-G4, Cardinal Summer 2018 Membro di UW Tacoma, Team S1-G4, Cardinal Summer 2018

UWT-CARDINAL-SU18S1G4

4 Membri

4 Guide realizzate

Un commento

Where is the best place to purchase a motherboard for the Altec Lansing Jacket H20 4?

Kelvin Jasper - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 10

Tutti i Tempi: 836