Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Electrolytic capacitors are electronic components used to store energy. If too much current runs through a capacitor, it may become bulged and need to be replaced. To replace a capacitor on the MRV-M500 you will need previous experience soldering electronics. To learn how to solder, see this guide.
Cosa ti serve
-
-
Remove all the Phillips 10.0mm and 7.0mm screws on the outside of the case.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.