Introduzione

Batteries fail from heat and if they reach their max charge cycles limit. This guide will show you how to replace it.

Parti

Nessuna parte richiesta.

Loosen the top left and top right 6.5mm PH1 screws that hold down the back cover.
  • Loosen the top left and top right 6.5mm PH1 screws that hold down the back cover.

  • The screws will not be able to be removed from the back cover. They can only be loosened or tightened.

Aggiungi Commento

Slide back cover forward using your thumbs.
  • Slide back cover forward using your thumbs.

Aggiungi Commento

  • Lift up the cover and set aside exposing the internals of the computer.

Aggiungi Commento

  • Make sure the laptop is turned off before starting.

  • Using PH1 screwdriver loosen the two screws on the right of the battery.

  • The screws will not be able to be removed from the battery. They can only be loosened or tightened.

Aggiungi Commento

  • Pull battery up using the tab provided.

Aggiungi Commento

  • Disconnect the clip connecting the battery to the computer.

  • Set battery aside.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 92