Salta al contenuto principale

Ricambi

Nessuna parte specificata.

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Turn the computer over. Slide the battery latch over and lift the battery out. Slide the battery latch over and lift the battery out.
    • Turn the computer over.

    • Slide the battery latch over and lift the battery out.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Unscrew the four 3mm screws with a J000 screwdriver.
    • Unscrew the four 3mm screws with a J000 screwdriver.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use the iFixit opening tool to lift the bottom cover off. Use the iFixit opening tool to lift the bottom cover off.
    • Use the iFixit opening tool to lift the bottom cover off.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the two 4mm screws with the J000 screwdriver. Remove the two 4mm screws with the J000 screwdriver.
    • Remove the two 4mm screws with the J000 screwdriver.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Turn the laptop right-side up, and open the laptop. Use the plastic pryer tool to loosen the flat piece surrounding the keys by gently prying it upwards from the laptop's base. Make sure to go around the entire perimeter of the piece to loosen all areas of it.
    • Turn the laptop right-side up, and open the laptop.

    • Use the plastic pryer tool to loosen the flat piece surrounding the keys by gently prying it upwards from the laptop's base.

    • Make sure to go around the entire perimeter of the piece to loosen all areas of it.

  6. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    The piece is now free from its fastenings to the base of the laptop, and can be lifted off. This piece is still connected to the laptop via power cable. Be sure not to lift it off too far or with too much force, as doing so could potentially rip or damage the cables. This piece is still connected to the laptop via power cable. Be sure not to lift it off too far or with too much force, as doing so could potentially rip or damage the cables.
    • The piece is now free from its fastenings to the base of the laptop, and can be lifted off.

    • This piece is still connected to the laptop via power cable. Be sure not to lift it off too far or with too much force, as doing so could potentially rip or damage the cables.

  7. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Gently remove the power cable with your hands or with the help of a prying tool.
    • Gently remove the power cable with your hands or with the help of a prying tool.

  8. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    The keyboard's 3mm fastening screws are now exposed and can be removed with a J000 screwdriver.
    • The keyboard's 3mm fastening screws are now exposed and can be removed with a J000 screwdriver.

  9. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    As before, the keyboard is now unfastened but still connected to the base via cables. Flip the keyboard over towards the edge of the laptop to expose the locations of the connectors. Avoid tugging on the cables when you do this.
    • As before, the keyboard is now unfastened but still connected to the base via cables.

    • Flip the keyboard over towards the edge of the laptop to expose the locations of the connectors. Avoid tugging on the cables when you do this.

  10. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Locate and remove the first connector cable. Use a prying tool to assist in unplugging the cable. Use a prying tool to assist in unplugging the cable.
    • Locate and remove the first connector cable.

    • Use a prying tool to assist in unplugging the cable.

  11. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Locate and remove the second connector cable. Again, use a prying tool to help remove. Again, use a prying tool to help remove.
    • Locate and remove the second connector cable.

    • Again, use a prying tool to help remove.

  12. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    The left section of the keyboard is connected by a single screw and two connector cables. Remove the 4mm screw with a J000 screwdriver. Remove the connecting cables with a prying bar.
    • The left section of the keyboard is connected by a single screw and two connector cables.

    • Remove the 4mm screw with a J000 screwdriver.

    • Remove the connecting cables with a prying bar.

  13. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    All sections of the keyboard are now free to be taken off and replaced!
    • All sections of the keyboard are now free to be taken off and replaced!

Linea Traguardo

Altre 2 persone hanno completato questa guida.

Jonathan Panella

Membro da: 21/02/2018

447 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S21-G1, Banghart Winter 2018 Membro di Cal Poly, Team S21-G1, Banghart Winter 2018

CPSU-BANGHART-W18S21G1

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,148