Introduzione

Upgrade your hard drive for more storage space.

  1. First, take off the battery by moving the latch to the left and pulling it up.
    • First, take off the battery by moving the latch to the left and pulling it up.

  2. Then unscrew the two Phillips screws. Pull the cover down, then up, revealing the internals Pull the cover down, then up, revealing the internals
    • Then unscrew the two Phillips screws.

    • Pull the cover down, then up, revealing the internals

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Unscrew the four screws indicated Pull on the tab that says "Pull" and remove the Hard Drive
    • Unscrew the four screws indicated

    • Pull on the tab that says "Pull" and remove the Hard Drive

  5. With even pressure on both sides, take off the SATA converter and then connect it to the drive you would like to replace it with. With even pressure on both sides, take off the SATA converter and then connect it to the drive you would like to replace it with.
    • With even pressure on both sides, take off the SATA converter and then connect it to the drive you would like to replace it with.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Gabe

Membro da: 09/04/2010

8.062 Reputazione

3 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

286 Membri

802 Guide realizzate

Thanks, great guide. Was a bit confused between steps three and four but I simply had to remove the metal casing around the hard drive.

Hasan - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 44

Tutti i Tempi: 31,233