Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Loosen the eight captive screws that secure the base cover to the computer base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Tighten the eight screws that secure the base cover to the computer base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws that secure the battery pack to the computer base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the battery pack cable from the connector on the system board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the pull-tab, lift the battery pack off the computer base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the NEW battery pack in the battery bay and replace the two screws that secure the battery pack to the computer base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Route the battery pack cable in the routing guide
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Connect the battery pack cable to the connector on the system board.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.