Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a PH1 screwdriver bit to remove the six M2.5x13 screws (2.4 mm) on the back of the laptop.
-
Use a PH1 screwdriver bit to loosen the one M2x3 screw (1.9 mm).
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the base cover up to remove it.
-
If you are having trouble, insert a plastic opening tool into the divots along the laptop's edges to loosen.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Peel back plastic cover of wi-fi card.
-
Use a PH1 screwdriver bit and remove the one M2x3 screw (1.9 mm)
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently undo the clips attached to the wi-fi card.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the cables that connect the wi-fi card.
-
Gently pull upwards to remove cables and slide the wi-fi card out from its slot.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
Un commento
What is the logic for removing the HHD prior to removing the WIFI card?