Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide will show you how to access and remove the solid state drive (SSD) for your Alienware 17 R4.
Cosa ti serve
-
-
Use a PH1 screwdriver bit to remove the six M2.5x13 screws (2.4 mm) on the back of the laptop.
-
Use a PH1 screwdriver bit to loosen the one M2x3 screw (1.9 mm).
-
-
-
Disconnect the battery connector cable, located on the right side of the laptop, above the hard disk drive.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.
Un commento
Is it advised to pull the HDD before pulling the SSD or is this guide just written in a way to cover how to remove both of them?