Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
In this guide, we will be showing you how to remove and replace the Hard Drive.
Cosa ti serve
-
-
Using the pull tab, disconnect the hard-drive cable from the system board.
-
-
-
Note the hard-drive cable routing and remove the cable from the routing guides on the computer base.
-
-
-
Remove the screws that secure the hard-drive assembly to the computer base.
-
-
-
Remove the screws that secure the hard-drive bracket to the hard drive.
-
-
-
-
Align the screw holes on the hard-drive bracket with the screw holes on the hard-drive assembly.
-
-
-
Replace the screws that secure the hard-drive bracket to the hard-drive assembly.
-
-
-
Align the screw holes on the hard-drive assembly with the screw holes on the computer base.
-
-
-
Replace the screws that secure the hard-drive assembly to the computer base.
-
-
-
Route the hard-drive cable through the routing guides on the computer base.
-