Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide will show how to replace a faulty cooling fan which can cause the computer overheating.

Parti

Nessuna parte specificata.

  1. Unscrew the two 4mm screws from the plastic covering. Pull the plastic cover up and slide off.
    • Unscrew the two 4mm screws from the plastic covering.

    • Pull the plastic cover up and slide off.

  2. Look for the yellow tab inside the computer. Disconnect the black wire with the yellow tab. This disconnects the battery.
    • Look for the yellow tab inside the computer.

    • Disconnect the black wire with the yellow tab.

    • This disconnects the battery.

  3. Disconnect the rest of the cables from the motherboard.
    • Disconnect the rest of the cables from the motherboard.

  4. Remove all sixteen of the screws on the underside of the laptop. Eight 2.5mm x 8mm Six 2.5mm x 10mm
    • Remove all sixteen of the screws on the underside of the laptop.

    • Eight 2.5mm x 8mm

    • Six 2.5mm x 10mm

    • Two 2.5mm x 18mm

  5. Gently, separate and remove the plastic palm rest.
    • Gently, separate and remove the plastic palm rest.

  6. Gently, disconnect the fan cable.
    • Gently, disconnect the fan cable.

  7. Unscrew and remove the two 5mm screws. Finally, remove the fan from the rest of the laptop.
    • Unscrew and remove the two 5mm screws.

    • Finally, remove the fan from the rest of the laptop.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 48

Tutti i Tempi: 2,008