Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Alienware 17 R2 Base Panel Replacement

Cosa ti serve

  1. Alienware 17 R2 Base Panel Replacement, Close the Display: passo 2, immagine 1 di 1
    • Close the display and turn the computer over.

    • Make sure PC is turned off!

  2. Alienware 17 R2 Base Panel Replacement, Loosen Screws: passo 3, immagine 1 di 1
    • Loosen the captive screws that secure the base panel to the computer base.

  3. Alienware 17 R2 Base Panel Replacement, Releasing Tabs: passo 4, immagine 1 di 1
    • Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.

  4. Alienware 17 R2 Base Panel Replacement, Remove Base Panel: passo 5, immagine 1 di 1
    • Slide and remove the base panel from the computer base.

  5. Alienware 17 R2 Base Panel Replacement, Disconnect Battery Cable: passo 6, immagine 1 di 1
    • Disconnect the Battery cable from the system board.

    • Turn the computer over.

    • Press and hold power button for 5 seconds to ground the system board.

  6. Alienware 17 R2 Base Panel Replacement, Battery Cable: passo 9, immagine 1 di 1
    • Connect the battery cable to the system board.

  7. Alienware 17 R2 Base Panel Replacement, Tighten Screws: passo 10, immagine 1 di 1
    • Tighten the captive screws that secure the base panel to the computer base.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Terrence15

Membro da: 12/18/17

79.121 Reputazione

441 Guide realizzate

Team

RampUP America, Inc. Membro di RampUP America, Inc.

Community

42 Membri

1.985 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 765